SERVICE OPERATIONS
29
Reproduction or translation, even partial, is forbidden without the written consent of Peugeot Motocycles
- Put back the drainage cap and strainer cap,
fitted with a new seal.
Tightening torque: 40 Nm.
- Pour the required quantity of oil corresponding
to the manufacturer's standards into the filler
hole:
• 0.92 I at oil change.
• 0.95 I at oil filter change.
- Fit the filler cap.
- Start the engine and let it run for a short while.
- Remove the engine's oil filler cap/gauge.
- Wipe dry the filler cap/gauge and fit it back but
do not screw it into the filler hole.
- Remove the filler cap/gauge and check the oil
level.
A. Oil level low.
B. Oil level high.
- Add oil if necessary.
Check the level with the machine
parked on its centre stand, on level
ground.
B
A
