SERVICE OPERATIONS
46
Reproduction or translation, even partial, is forbidden without the written consent of Peugeot Motocycles
Installing the valve clearance
- Remove the storage compartment. See:
Procedure 1. page 23.
- Remove the under-saddle panels.
See: Procedure 2. page 23.
- Remove the transmission air filter cover.
- Disconnect the oil vapour return hose to the
rocker cover.
- Remove the rocker cover (5 screw).
Tightening torque: 10 Nm.
- Rotate the engine by hand in the operating
direction in order to bring the rocker bearings
on the back of the cams (A).
-
Using the set of feeler gauges, measure
the clearance of each valve.
Clearances:
• 0.10
±0.02
mm at the intake
• 0.20
±0.02
mm at the exhaust
A
