22
Customer Care Center 1-800-732-2677
PROGR
AMMING
Pet n (or Pet Name):
Where Pet n’s (or Pet Name)
individual access and pet settings can be changed. All pets
that have been successfully programmed to the PASSport
™
will show under the Pet Settings menu below Add Pet.
Master Access
With Master Access you can easily set the same access option and settings for all pets programmed to the PASSport
™
,
without the need to individually program by pet. It is the default access setting when pets are first programmed to the
PASSport
™
.
To open the Master Access menu from the
Main Menu
select
Setup > Pet Settings > Master Access
. Under the
Master Access menu you will find the following options:
Mode:
Access mode set for all pets unless an individual pet has an access mode set other than Master under their
individual pet setting. There are four options: SmartMode (which is In/Out and is the default access mode), In-Only,
Out-Only and Timer.
Re-latch Time:
Amount of time the PASSport
™
multi-point locking U-flap system takes to re-latch and lock once a
PASSport Key
™
is no longer detected for any pet set to Master Access.
In Tone:
Audible tone that sounds when any pet set to
Master Access comes in.
Out Tone:
Audible tone that sounds when any pet set to
Master Access goes out.
Master Access Mode:
There are 4 Master Access Modes: SmartMode, In-Only,
Out-Only and Timer.
SmartMode:
The default access mode and allows any pet wearing a programmed PASSport Key
™
to enter or exit as
they please.
In-Only Mode:
Allows your pet(s) to enter through the PASSport
™
but your pet(s) cannot exit. This is useful if you need
to take your pet(s) to the vet.
Out-Only Mode:
Allows your pet(s) to exit through the PASSport
™
but your pet(s) cannot enter.
Timer Mode:
Allows you to program any of the other access modes (SmartMode, In-Only, Out-Only) at specific
times of day. There are four time settings available with a minimum of two time settings required. For example Timer
mode is useful if you want to keep your pet(s) in at night (say from 7pm to 7 am) but you want to give the freedom to
come and go as they please the rest of the day (from 7 am to 7 pm).
To Change Master Access Mode
1. To change the Master Access Mode, from the
Main Menu
select
Setup > Pet Settings > Master Access
. Use
the right arrow key to select. Mode will be displayed at the top of Master Acdess Menu.
2. Then use the right arrow key to scroll through and select
the desired mode option
(SmartMode, In-Only, Out-
Only or Timer)
. Use the left arrow/back key to return to
the Main Menu.
