www.petsafe.net
29
PROGR
AMMING
access mode to In-Only at 7 pm.
After using Timer Mode to program the example listed, the Access Time menu screen would display:
To Remove Timer Mode Access Time:
1. If you want to remove an access time for timer mode from the Main Menu select > Setup > Pet Settings > Master
Access > Mode: Timer
2. Press the right arrow key to scroll to the Timer option to select.
3. Once Timer has been selected, Access Time will appear
at the bottom of the Master Access Menu list. Use the down
arrow key to highlight Access Time and then the right arrow
key to select.
4. Use the up and down arrow keys to highlight which
Access Time slot you wish to remove. Push the right arrow key
to select.
5. Use the down arrow key to highlight
Remove
and the
right arrow key to select. The time slot on the Access Time
Menu should now be removed. Please remember you must
have a minimum of two Access Time slots entered for Timer
Mode to work.
RE-LATCH TIME
The re-latch time is the amount of time it takes the pet door to re-lock after the PASSport Key
™
is no longer detected. The
factory default re-latch time is set to 2 seconds but can be changed from 1 second to 60 seconds for each pet. This is
especially useful if you have older or slower pets who may need more time to go through the flap before it re-locks.
Note:
The re-latch time can only be changed by pet if the individual pet access mode is NOT set to Master.
To Change Re-Latch Time:
1. To change the Master Access Re-latch time, from the
Main Menu
select
Setup > Pet Settings > Pet n
(or pet
name). Use the right arrow key to select.
2. Use the down arrow key to highlight
Relatch Time
then
use the right arrow key to scroll through to find the desired
re-latch time. Once you have found the desired re-latch
time, press the left arrow/back key to return to the main
menu.
12 am
7 am
12 pm
7 pm
11 pm
In Only
Smart Mode (in/Out)
