26
Customer Care Center 1-800-732-2677
PROGR
AMMING
3. The rename pet screen will show with
Pet n
(where n is the
next available number) listed at the bottom. You can leave the
pet name as default
Pet n
or you can rename the pet. To rename
the pet, use the arrow keys on the 5-Star Navigation to scroll
through the text entry screen to
CLR
. Press the enter button on
5-Star Navigation to clear name. Use the arrow keys to select
letters on the text screen to type pet’s name. Select
the
symbol on text screen to complete the new name. Repeat these
steps for each pet you want to add to the PASSport
™
.
INDIVIDUAL PET SETTINGS
The individual pet settings allow you to customize settings and access to the PASSport
™
by pet. It is very useful if you have
multiple pets which need different access options or settings (for example cat needs different access than the dog). The
default individual pet setting is Master until changed. Also if you have a different setting programmed for an individual
pet, it overrides the Master Access settings for that specific pet.
To change the access and settings for a specific pet, from the
Main Menu
select
Setup > Pet Settings
. Use the down
arrow key to highlight the desired pet then press the right arrow key to select. Under each individual pet menu you will
find the following options:
Pet Access:
Menu where you can change the Access
Mode, Re-latch time, In-tone and Out-tone for an individual
pet.
Rename Pet:
Allows the default
Pet n
(where n is the next
available number) name assigned by the PASSport
™
to be
changed to the actual pet’s name or allows the name to be
changed.
Relearn Pet:
Allows the PASSport
™
to keep a pet’s programmed settings if for some reason the pet’s has to be re-
programmed to the PASSport
™
(for example if replacing the pet’s PASSport Key
™
).
Remove Pet:
Allows a pet who is programmed to the PASSport
™
to be deleted with all programmed settings removed.
Pet Access
Under each individual pet, the Pet Access menu allows the Access Mode, Re-latch time, In-tone and Out-tone to be
changed for that specific pet.
To open the Pet Access menu, from the Main Menu select
Setup > Pet Settings > Pet n
(or name of pet) > Pet Access.
Press the right arrow key to select. Under the Pet Access menu are the following options:
Mode:
Access mode set for the individual pet which overrides the Master Access Mode. There are five options: Master
(which is the default access mode), SmartMode (In/Out), In-Only, Out-Only and Timer.
Re-latch Time:
Default re-latch time is 2 seconds but can be changed from 1 second to 60 seconds for each pet
and is useful if you have an older or slower pet. If Master mode is selected as the individual pet access mode, then the
individual re-latch time cannot be adjusted.
In-Tone:
Default is off but 10 tone options available. If Master mode is selected as the individual pet access mode, then
the individual in-tone cannot be adjusted.
Example
