PESA RCP-CSD, Manual

Page: 47 / 68

RCP-CSD
Glossary 39
Data Key List
A named list of the functions assigned to each data key on a panel.
Multiple panels may share a data key list as long as they are the same type of panel. Different
panel types may not use the same data key list.
Data key list names are one to eight characters in length and are constructed using uppercase
letters, numbers, and spaces. The first character must be a letter.
Default Destination
The destination for which status will be displayed when power is applied to a panel, or when a
new configuration is downloaded to the controller.
Although not mandatory, it is recommended that a default destination be selected for each panel.
Destination
One or more logical outputs (limited to one per level), on one or more levels, which are switched
together as a group.
Destination names are constructed using one category followed by 0, 1 or 2 indices. If no index is
selected, the default “00” (which is not displayed) will be used.
Destination Block
See: Source Block.
Destination Group
See: Destination.
Destination Include List
A named list of the destinations a specific control panel is authorized to control.
A destination include list may be shared by multiple panels.
The default destination assigned to a panel may be controlled even if it is not on the destination
include list.
Destination include list names are one to eight characters in length and are constructed using
uppercase letters, numbers, and spaces. The first character must be a letter.
Destination Number
A number assigned to each destination by the controller and used by CPU Protocol 1.
Destination numbers are also assigned to reentries.
Destination Status
See: Status.