page 2.6
3/98
P/N 81905903730
INSTALLATION
2
Section 2
Installation
Jaguar Audio
Figure 2-1 Level Code Selection
2.7 Level Code (Strobe) Selection Continued:
SWITCH POSITIONS
6
5
4
3
2
1
STROBE LEVEL 1
0
0
0
0
0
1
STROBE LEVEL 2
0
0
0
0
1
0
STROBE LEVEL 3
0
0
0
0
1
1
STROBE LEVEL 4
0
0
0
1
0
0
STROBE LEVEL 5
0
0
0
1
0
1
STROBE LEVEL 6
0
0
0
1
1
0
STROBE LEVEL 7
0
0
0
1
1
1
UP TO....
STROBE LEVEL 62
1
1
1
1
1
0
2.8 Output/Input Code Selection
The input and output coding switches for matrix "A" (S2 and S1 respec-
tively) are located on the inside of the Jaguar Audio Routing Switcher on
the upper middle of the backplane. The input and output coding switches
for matrix "B" (S5 and S4 respectively) are located on the inside of the
Jaguar Audio Routing Switcher on the lower middle of the backplane. The
input and output switch numbers run 1 to 8, right to left. For all switch
position to binary code conversions refer to Table 2-3.
The output code switches (S1 for matrix "A" and S4 for matrix "B") select
output codes 0-255 and the input code switches (S2 for matrix "A" and S5
for matrix "B") select input codes 0-255. Refer to Figures 2-3 and 2-4 for
examples of input and output code selection and see Figure 2-2 for the
physical location of the output and input code switches.
