page 2.20
3/98
P/N 81905903730
INSTALLATION
2
Section 2
Installation
Jaguar Audio
2. Align the inverted "L" assembly to the corresponding screw holes on
the rear of the Jaguar Audio Frame and on the card cage extension.
3. Once the inverted "L" assembly is aligned with the corresponding
screw holes, attach it to the rear of the Jaguar Audio Frame and to the
card cage extension using six Phillips head screws.
2.19 Optional Output Combiner Card Installation
The optional Output Combiner Cards are installed in the left-hand portion
of the rear of the Jaguar Audio Routing Switcher inside the optional Card
Cage. The optional Card Cage is designed for the installation of up to
eight Output Combiner Cards.
To install the Output Combiner Cards take the following steps while refer-
ring to the Jaguar Audio Mainframe configuration drawings on pages 6.3
and 6.4:
1. Align the first Output Combiner Card with the right-hand of circuit card
guides in the Card Cage (component side to the left).
2. Carefully push the Output Combiner Card into the Card Cage until the
circuit card connectors make initial contact with the backplane connec-
tors. At this point, firmly but carefully continue pushing the combiner
card into the card cage while making sure the connectors are properly
aligned. Continue pushing the combiner card until it is in place and the
connectors are firmly mated.
3. Once the Output Combiner Card is installed in the Card Cage, install
the appropriate combiner card locking brace. To install the combiner
card locking brace align the tab end of the locking brace with the slot
provided on the card cage extension and insert the tab into the slot.
Once the tab is inserted into the appropriate slot, align the screw hole
on upper end of the locking brace with the appropriate screw hole on
the Card Cage. Once the locking brace screw hole is aligned with the
screw hole on the Jaguar Audio Frame, attach the combiner card
locking brace to the Card Cage using a pan-head Phillips screw.
4. Align the next Output Combiner Card with the next set of circuit card
guides in the Card Cage of the rear of the Jaguar Audio Routing
Switcher and repeat steps 2 and 3.
2.18 Optional Card Cage Installation Continued:
