page 2.18
3/98
P/N 81905903730
INSTALLATION
2
Section 2
Installation
Jaguar Audio
2. Carefully push the Reference Interface Card into the Jaguar Audio
Routing Switcher until the circuit card connectors make initial contact
with the backplane connectors. At this point, firmly but carefully continue
pushing the interface card into the frame while making sure the connec-
tors are properly aligned. Continue pushing the interface card until it is
in place and the connectors are firmly mated.
2.16 64X32 Matrix Card Installation
The 64X32 Matrix Cards are installed in the lower portion of the front of the
Jaguar Audio Routing Switcher. The Jaguar Audio Routing Switcher is
designed for the installation of up to four 64X32 Matrix Cards.
To install the 64X32 Matrix Cards in the Jaguar Audio Routing Switcher
take the following steps while referring to the Jaguar Audio Mainframe
configuration drawing on page 6.2:
1. Align the shield plate on the first 64X32 Matrix Card with the upper set
of circuit card guides in the lower portion of the front of the Jaguar Audio
Routing Switcher.
2. Carefully push the 64X32 Matrix Card into the Jaguar Audio Routing
Switcher until the matrix card connectors make initial contact with the
backplane connectors. At this point, firmly but carefully continue pushing
the 64X32 Matrix Card into the frame while making sure the connectors
are properly aligned. Continue pushing the matrix card until the connec-
tors are firmly mated. Make sure the circuit card extractors are engaged
in the slots in the sides of the frame.
3. Align the shield plate on the next 64X32 Matrix Card with the next
available set of circuit card guides in the lower portion of the front of the
Jaguar Audio Routing Switcher and repeat step 2.
4. Repeat step 3 until all of the 64X32 Matrix Cards are installed in the
Jaguar Audio Frame.
2.15 Reference Interface Card Installation Continued:
