Section 2
page 2.17
3/98
P/N 81905903730
INSTALLATION
2
Installation
Jaguar Audio
To install the PS130 Power Supplies in the Jaguar Audio Routing Switcher
take the following steps while referring to the Jaguar Audio Mainframe
configuration drawing on page 6.2:
1. Align the shield plate on the first PS130 Power Supply with the left-
hand set of circuit card guides in the upper, right-hand portion of the
front of the Jaguar Audio Routing Switcher (circuit side up).
2. Carefully push the PS130 Power Supply into the Jaguar Audio Routing
Switcher until the power supply connectors make initial contact with the
backplane connectors. At this point, firmly but carefully continue push-
ing the PS130 Power Supply into the frame while making sure the
connectors are properly aligned. Continue pushing the power supply
until the slide lock snaps into place and the connectors are firmly
mated.
3. Align the shield plate on the next (redundant) PS130 Power Supply
with the next set of circuit card guides in the upper, right-hand portion
of the front of the Jaguar Audio Routing Switcher and repeat step 2.
4. Repeat step 3 until all of the PS130 Power Supplies are installed in the
Jaguar Audio Frame.
2.15 Reference Interface Card Installation
The Reference Interface Card is installed in the lower set of the stand-off
circuit card guides (between card slots 2 and 3) in the Jaguar Audio Rout-
ing Switcher. To install the Reference Interface Card in the Jaguar Audio
Routing Switcher take the following steps while referring to the Jaguar
Audio Mainframe configuration drawing on page 6.2:
1. Align Reference Interface Card with the lower set of stand-off circuit
card guides in the Jaguar Audio Routing Switcher (component side up).
2.14 PS130 Power Supply Installation Continued:
