PESA Cougar 32X32, Open Me First

Page: 81 / 179

07/96
P/N 81905903820 page 4.14
Section 4 System Connections Open-Me-First
The pinout of the 9-Pin Control Connector is as follows:
PIN NO. DESCRIPTION
1 GROUND
2 RX+ DATA
3 TX- DATA
4 GROUND
5 SPARE
6 GROUND
7 RX- DATA
8 TX+ DATA
9 GROUND
The pinout of 5-Pin Control Connector is as follows:
PIN NO. DESCRIPTION
1 TX+ DATA
2 TX- DATA
3 GROUND
4 RX+ DATA
5 RX- DATA
For PRC communications, the user should use a direct pin-for-pin cable for
interfacing between the control connectors and the peripheral equipment.
DO NOT use a "NULL MODEM" cable.
Monitor Output Connectors
The Monitor Output Connectors provide a test signal which will be utilized
to monitor Jaguar Audio Routing Switcher activity when an optional moni-
tor card and output combiner cards are installed in the Jaguar Frame.
Reference (Sync) Connectors (1 and 2)
The sync connectors are used to connect an external sync signal to the
Jaguar Audio Routing Switcher. The sync signal may be either a color
black or composite sync signal. The use of an external sync signal allows
switch changes to be accurately timed in the vertical interval. The sync
connectors are loop-thru connectors and must be terminated with 75
ohms if looping is not used.
Control (PRC) Connectors (CONTROLS IN) Continued:
4.5 Jaguar Audio Frame Connectors Continued: