PESA Cougar 32X32, Open Me First

Page: 176 / 179

06/97
Internal PS130 Power Supply Addendum
page 3
ADDENDUM
Power Connections
*CAUTION*
PS130 POWER SUPPLIES CONTAIN ELECTRICAL SHOCK HAZARDS AND SHOULD ONLY
BE SERVICED BY QUALIFIED SERVICE PERSONNEL AND/OR QUALIFIED TECHNI-
CIANS.
*CAUTION*
THIS POWER SUPPLY USES AN INDIVIDUAL AC POWER CORD.
DISCONNECT CORD BEFORE REMOVING SUPPLY.
Power Connect
To power-up a PS130 Power Supply and its associated routing switcher
frame take the following steps:
1. Insert the power supply into the frame following the instructions in the
Power Removal Section of this addendum.
2. Connect the power supply to the AC line.
3. Repeat steps 1 and 2 for a secondary power supply if applicable.
4. If applicable, connect any DC power looped to and from other frames
in the routing switcher system to the unit under test.
Power Disconnect
To power-down a PS130 Power Supply, disconnect the AC power
cord from the power supply's AC line input connector. To power-
down a PS130 Power Supply and its associated routing switcher frame
take the following steps:
1. If applicable, disconnect any DC power looped to and from other
frames in the routing switcher system from the unit under test.
2. Disconnect the AC line from the primary PS130 Power Supply.
3. If applicable, disconnect the AC line from the secondary PS130 Power
Supply.