Perrot VP3 VAC, Maintenance And Operating Instructions, Page: 24 / 29

TDP074e.doc Rev. 28.11.2016 Page 24 / 29
Perrot REGNERBAU CALW GmbH Industriestraße 19 ‐ 29 / D ‐ 75382 Althengstett / Germany
Tel.: +49 ‐ 7051 ‐ 162 ‐ 0 / Fax: +49 ‐ 7051 ‐ 162
–
133
E ‐ mail: perrot@perrot.de / Construction team e ‐ mail: technik@perrot.de
When changing the main nozzle the nozzle's thread should be cleaned and greased.
This enables the nozzle to be easily loosened by hand (using the assembly key
RB25189) and just as easily tightened again.
Wrong position
Right position
When fitting the nozzle make sure
that the funnel gets pushed on in the
right position. (See picture.)
If the funnel is not properly fitted
first, the nozzle cannot be screwed
into the manifold head.
When fitting the new nozzle, make
sure that the nozzle gets fully
screwed in, that the main secondary
nozzle points downwards (6 o'clock
position) and that the sealing ring is
correctly fitted (figure 5).