Perrot VP3 VAC, Maintenance And Operating Instructions, Page: 12 / 29

TDP074e.doc Rev. 28.11.2016 Page 12 / 29
Perrot REGNERBAU CALW GmbH Industriestraße 19 ‐ 29 / D ‐ 75382 Althengstett / Germany
Tel.: +49 ‐ 7051 ‐ 162 ‐ 0 / Fax: +49 ‐ 7051 ‐ 162
–
133
E ‐ mail: perrot@perrot.de / Construction team e ‐ mail: technik@perrot.de
5.5 External start using key switch
There is a safety circuit with key ‐ operated switch for checking whether any
unauthorized people are in the danger zone / area to be watered.
The key ‐ operated switch gets fitted in a position from which the whole danger zone
can be clearly seen. Watering begins only when the operator gives the all ‐ clear by
turning the key.
For details of how the controller works please refer to the separate TDP072 operating
instruction.
5.6 Cabeling
3 ‐ core cable laid during installation to the VP3 pop ‐ up sprinkler's electrical connection.
The cable is pulled through the right or left opening on the bottom of the housing into
the cable compartment.
Proposal for pulling in the
control cable into the sprinkler