Perrot VP3 VAC, Maintenance And Operating Instructions, Page: 22 / 29

TDP074e.doc Rev. 28.11.2016 Page 22 / 29
Perrot REGNERBAU CALW GmbH Industriestraße 19 ‐ 29 / D ‐ 75382 Althengstett / Germany
Tel.: +49 ‐ 7051 ‐ 162 ‐ 0 / Fax: +49 ‐ 7051 ‐ 162
–
133
E ‐ mail: perrot@perrot.de / Construction team e ‐ mail: technik@perrot.de
Tighten cover using face spanner
ZB98236 and approx. 10Nm of torque.
That means, with a lever length of
10cm you need to apply a force of
100N to the spanner.
Note
:
After the third or fourth winter there
should be no further expansion.
Marker points
Bracing ribs
Caution:
If the lock screw cannot be screwed in,
it will hit a piston drive bracing rib! In
this case, the grey cover must be
tightened a bit more so that the lock
screw misses the bracing rib. The
orientation of the bracing ribs is
indicated by marker points.