Permobil ConnectMe M400, Service Manual

Page: 52 / 80

52
Lights
Lights
(accessories)
Removing the front lights & indicators
1. Switch off the main power switch on the
control panel.
2. Remove the front and upper chassis covers.
See page 8-9.
Removal of lights
3. Disconnect the lights at the connection on the
cabling. This is positioned on the inside of the
chassis, next to the seat lift (see fig.).
The conectors on the front
light and indicators cabling.
4. Remove the front link arm covers. See page
10. Take note of how the lights cabling is
placed underneath the cover of the linkarm
(see fig.).
5. Remove the light, it’s mounted with two screws
(see fig.).
The front lights are mounted with two screws.
The Drive Motor Cover is fitted with two screws.
Removal of indicators
6. Disconnect the indicator lights at the connector
on the cabling. This is positioned on the inside
of the chassis, next to the seat lift.
7. The indicators are delivered mounted on the
drive motor cover. Remove the drive motor
cover, it’s fitted with two screws (see fig.).
For this task the following tools are necessary:
1 Torx key TX20.
1 Allen key 3 mm.