Permobil ConnectMe M400, Service Manual, Page: 10 / 80

10
Covers
Removing the front link arm covers.
Both sides of the link arms have covers fitted. The
covers are fitted with four screws.
1. Switch off the main power switch on the control
panel.
2. Remove the drive wheel on the side in question
(see page 18).
3. Remove the four screws holding the covers
(see fig.).
Assembly
Assemble in the reverse order.
1. Fit the covers using the four screws (see fig.).
2. Fit the drive wheel on the side in question (see
page 18).
Covers
Front link arm covers.
Front link arm covers.
For this task the following tools are necessary:
1 Torx key TX20.