Permobil CJSM2, User Manual

Page: 31 / 72

R-net LCD (CJSM2)
R-net LCD control panel
2.5.2.2 Pairing setup
Figure 30. The arrow points to the flashing Bluetooth®
icon.
The control panel Bluetooth® must then be put into Discovery
Mode by following this sequence description:
• Deflect the joystick in a forward direction and hold until there is
a beep. This takes approximately 10 seconds; then release.
• Deflect the joystick in the reverse direction and hold until there is
a beep. This takes approximately 10 seconds; then release.
The screen will display a flashing Bluetooth® icon above the
computer image. This confirms that the control panel Bluetooth® is
set in Discovery Mode. It is now discoverable for other Bluetooth®
devices.
2.5.2.3 Pairing with different devices
Depending on the type of device you are pairing with - a PC, an
Android™ device or an iDevice®, - you will need to follow a
specific procedure depending on the device you want to connect to.
Some procedures are described below.
31