Permobil CJSM2, User Manual

Page: 48 / 72

R-net LCD (CJSM2)
R-net LCD control panel
2.6.4.1 Create a sequence
Figure 51. A tick followed by three dots showing a
learned sequence.
• Select the command to use as the sequence initiator. In this
example, TV – ON.
• Select Learn Code, by deflecting the joystick to the right while
the command is highlighted.
• Point the TV remote control at the control panel’s IR receiver
and press the On/Off button twice.
• After each successful learn operation, a tick momentarily appears
on the screen, select Learn Code again.
• Point the DVD remote control at the control panel’s IR receiver
and press the On/Off button twice.
• After each successful learn operation, a tick momentarily appears
on the screen, selectLearn Code again.
• Complete the sequence by highlighting Exit and deflecting the
joystick to the left.
• Now the TV – ON command will have a tick and three dots
beside it, showing a learned sequence.
48