Driver’s Training and Operation
19
5
Drop Handle.
Components: Handlebars, Drop Handle Lever, Release
Cable, Latch Pin, and Latch Striker.
Pull back on the Steering Handles. Confirm that
handlebars stay in an upright position.
Push the Drop Handle Lever rearward with your thumb and
lower the Handlebars.
Confirm that handlebars lock in the down position.
6
Fluid-filled Tire.
Components: Front
tires (2) and Rear Tires (2).
Read Safety Manual
WARNING 18
, Tire Safety before
starting or operating the Triumph.
Examine all tires for wear and damage. Confirm
that tires are free from visible damage and tread depth
exceeds
1/4 INCH
.
Rotate each tire so the valve stem is in the
12 O’CLOCK
position and check pressure. Confirm that
tire pressure is
12 PSI
(83 Kilopascals) and fluid is visible
7. Machine Safety Label Visual Test.
Confirm that all Labels are in in place and legible.
8.
Machine Guard Visual Test.
Confirm that Hood and Engine Guard are securely fastened
in place.
9.
Articulating Bolt Lock Visual Test.
Confirm that articulating Bolt Lock is securely fastened in
place.
10. Articulating Joint Safety Link Visual Test.
Confirm that articulating Joint Safety Link is securely
fastened in place.
11. Slip Resistant Footpads Visual Test.
Confirm that both Footpads are not worn or damaged and
are securely fastened in place.
The Drivers Training and Operation Section is completed. Proceed
to the Spreader Operation section.
