Column Refrigeration Service Manual
79
8.6 Installing Filters
8.6.1 Carbon Air Filters
Carbon air filters should be placed in the holder in
the perforated panel located in the top-rear of the
cabinet (A).
NOTE:
When installing carbon air filter in wine
units, the top rack will need to be removed to
access the perforated panel.
1.
Remove the filter from the plastic bag before
installing into the unit. Take care not to open or
puncture the tyvek bag in the casing.
2.
Pull firmly to lower the carbon air filter panel.
3.
Place the carbon air filter into the holder
directly onto the panel and close panel - push
firmly to engage closure clips.
4. It is recommended to replace the carbon air
filter every 3-6 months.
8.6.2 Ethylene Air Filters
Ethylene filters should be placed in the holder in
top of the tip-out produce bin (B).
1.
Remove the filter from the plastic bag before
installing into the unit. Take care not to open or
puncture the tyvek bag in the casing.
2.
Open the tip-out bin to access filter housing
located on the top of the bin.
3.
Slide filter into housing and close tip-out bin.
4.
It is recommended to replace the ethylene filter
every 3 months.
B
A
Figure 8-6. Air Filter Installation
