Perkins 103-06, Workshop Manual

Page: 71 / 80

Inspection items Standard Standard To Be Allowable
Dimension Value Repaired Limit Remarks
INJECTION NOZZLE
Type 093500-2240 (Part No. 131406340
Injection pressure kg/cm
2
(psi)
120 115-125
(1706) (1635.3-1777.5)
Angle of injection direction 4°
COOLING SYSTEM
COOLING
(tooling method Water cooled, forced circulation
Thermostat open temperature ('C) 75 73.5-76.5
Thermostat full-open temperature ('C) 90
Pump discharge (lit/min)
(at 2500rpm engine speed at cold)
40
ELECTRICAL SYSTEM
STARTER MOTOR
Type M003T32589 (Part No. 185086370)
No. of teeth of pinion gear 8
Shifting method of pinion Magnetic
Wear of commutator diameter 32
(1.26")
31
(1.22")
Stepped wear of commutator 0.05
(.002")
0.4
(.016")
Bending allowance of armature shaft 0.08 or more
(.003")
Length of brush 17
(.63")
11.5
(.45")
Spring force of brush (kg) (Ibs) 1.95
(4.3)
1.66-2.24
(3.66-4.94)
0.9
(1.98)
ALTERNATOR
Type GP8146 (Part No. 185046210)
Bend of rotor shaft
0.07 (.
0028")
REGULATOR
Type
Regulating voltage
RS5101 (Part No. 185516060)
14.5 14-15