PerkinElmer TORION T-9, User Manual

Page: 243 / 276

Desorption . 239
8. After entering a name for the device the name will appear in parentheses after the MAC and
IP addresses as shown below.
On the SPS-3 device the name will display on the splash screen as shown below.
As shown in a previous image Desorption includes two tabs, the first is Parameters
where settings or parameters for each specific method are displayed.
9. When a method is selected from the
Method List
the desorption module parameters which
have been previously set on the SPS-3 device for that method will be displayed.
Changes to the parameters can be made in Chromion and will be sent to the device.
Refer to the SPS-3 (Sample Prep Station) User’s Guide for parameter ranges for
temperature, flow rate, and timer.
NOTE: If parameters changes are made on the device the changes will not appear in Chromion until the
device is reloaded in the Desorption window.
10. Changes to the method name can be made by either clicking on the Rename Method icon
or by right clicking on a current method name. Either action will open a dialog in which to
rename the method.