Perkin-Elmer STA 6000, Installation And Hardware Manual

Page: 76 / 84

76 . STA 6000 Installation and Hardware GuideSTA 6000 Installation and Hardware Guide
– Remove the sample trays from the autosampler, or leave them in place, to load
the crucibles. If you removed the trays, carefully return them to the autosampler
and make sure that the two knobs on the bottom of each tray engage the holes
in the autosampler plate.
– Now you can have the system weigh each sample in the list. You can also choose
to have each sample weighed right before the run starts. To weigh all the
samples before starting the play list, highlight the Sample List line. A message
informing you that a method has not been selected is displayed. You can select
the method after the samples have been weighed. Click
Weigh List
. The
Tare/Weigh System screen appears and the system begins to weigh the samples
listed in the Sample List. When finished, the weights are displayed, along with
the tare weights, in each Sample line.