7
System-Specific
Retract components only when the con-
crete has sufficiently hardened and the
person in charge has given the go-ahead
for striking to take place.
Anchoring is to take place only if the an-
chorage has sufficient concrete
strength.
Inspection of the anchoring and associa-
ted components must be carried out by
the contractor (user).
Enclosure of the platform or mounting
of additional surfaces which are exposed
to the influences of the wind changes
the stability and must therefore be che-
cked. If necessary, additional measures
must be implemented.
The platforms are to be inspected for
signs of damage by authorised person-
nel at regular intervals.
During operating conditions, working
areas at great heights are always to be
secured against falling objects through
the use of suitable construction
measures.
Hatches and openings on accessible
working areas must be kept closed
during working operations.
Concrete residue and other soiling that
could impair or cause the function to fail
must be removed. The platforms are to
be kept clean at all times.
As a result of the moving procedure,
falling edges are formed between the
platforms. Corresponding areas of risk
are to be secured.
In case the access hatches are blocked
when retracting the formwork as well as
during the entire moving procedure,
ensure that site personnel can still use
the emergency escape route.
Site personnel, construction materials or
tools may not be transported with the
crane during moving operations. Excep-
tions to this can be determined through
the operational working and assembly
instructions.
Safety Instructions
Introduction
CB 240 Climbing Formwork
Instructions for Assembly and Use – Standard Configuration
– CB 240 Dimensioning Information
– CB 240 Climbing scaffold type test
– CB 240 and CB 160 Climbing System Brochures
– Instructions for Use for the Crane Splice 24
– Instructions for Use: MAXIMO Lifting Hook
– PERI design tables
Additional Technical Documentation
AuV CB 240 EX.indb 7
29.06.16 09:44
