66
Klettertraverse RCS 10 t
Art.-Nr. 112986
Ausgabe 01 | 2013
Originalbetriebsanleitung
b
5
β
≤ 45°
L
4.11
4
4.10
4.10
4
4
1 x 45°
β
≤ 30°
β
= 45°
10 x 10
4.30
3.80
12 x 12
5.20
5.20
14 x 14
6.00
6.00
CB 240 Climbing Formwork
Instructions for Assembly and Use – Standard Configuration
C1 Planning and Work Preparation
Moving the Units
Installation of Compression Brace
In order to prevent the Strongbacks from
being pulled out of line during the lifting
process due to the redirection of forces,
clamp a suitable piece of timber (4.10)
as a compression brace between the
top ends of the Strongbacks (4).
(Fig. C1.14)
Dimensions of the compression brace,
see Table 7.
The timber ends (4.10) are to be adapted
to the U120 profile of the Strongback (4)
through chamfering and notching. For
fixing with wood screws 8 x 160 and
washers (4.11), use the drilled holes in
the web of the Strongback.
(Fig. C1.15)
If no compression braces are used
between the Strongbacks or strongly un-
balanced platforms are to be moved, we
recommend the use of the Lifting Beam
RCS 10 t, Item no. 112986.
Follow Instructions for Use. (Fig. C1.16)
Crane sling angle
Crane sling angle
Permissible spacing for the Strongback CB L [m]
Dimensions of the com-
pression brace
width x depth [cm]
Fig. C1.14
Table 7
Permissible spacing for the Strongback CB
Top view
Fig. C1.15
Fig. C1.16
AuV CB 240 EX.indb 66
29.06.16 09:46
