5
General
The use in a way not intended, deviating
from the standard configuration or the
intended use according to the Instruc-
tions for Assembly and Use, represents
a misapplication with a potential safety
risk, e.g. risk of falling.
Only PERI original components may be
used. The use of other products and
spare parts is not allowed.
Changes to PERI components are not
permitted.
The working platform can be supple-
mented with:
– formwork carriage, strongbacks and
adjustable braces for accommodating
the VARIO and TRIO formwork sys-
tems.
– a height-adjustable finishing platform
complete with access ladder which is
attached to posts.
– end-to-end guardrails on the working
and finishing platforms in accordance
with respective national guidelines.
– a tension anchor which prevents tip-
ping inwards.
Technical Data
– width of bracket: 2.40 m
– static height: 1.80 m
– retraction distance: 75 cm
– max. formwork height: 5.40 m
Product Description
PERI products have been exclusively
designed for use in the industrial and
commercial sectors by suitably trained
personnel.
The CB 240 climbing formwork system
is normally used as shoring in order to
support anchored wall formwork in ac-
cordance with EN 12812. The formwork
is firmly connected with the climbing
bracket and is moved as a single unit
suspended on a crane. The climbing
formwork can also be used as a working
platform. The working platform for ope-
rating the formwork consists of plan-
king, platform beams and two fixed
climbing brackets. These transfer the
loads deriving from the dead weight, live
loads and prevailing wind loads via the
anchorage and bottom pressure point
into the structure.
Intended Use
Instructions for Use
CB 240 Climbing Formwork
Instructions for Assembly and Use – Standard Configuration
Introduction
AuV CB 240 EX.indb 5
29.06.16 09:44
