50
2.5
2.2
CB 240 Climbing Formwork
Instructions for Assembly and Use – Standard Configuration
B3 Formwork Utilisation
2. Place ratchet lever, SW 19, on the
transmission screw (2.5). Depending
on the effect of the ratchet on the le-
ver, the carriage is moved towards or
away from the wall.
(Fig. B3.02.1 + B3.02.2)
If the Carriage moves in the wrong
direction, turn the ratchet lever in the
opposite direction.
3. Moving the carriage: carry out proce-
dure simultaneously on both brackets.
(Fig. B3.02)
CB Carriage Operations
Assembly
1. Release wedge (2.2) with hammer.
(Fig. B3.01)
4. When the carriage with formwork is in
position, fix wedge with hammer.
Carriage is then secured. (Fig. B3.03)
If the formwork must be pressed
against the previous concreting section
when securing with the wedge, the
ratchet lever SW 19 is to be used.
Fig. B3.02
Fig. B3.01
Fig. B3.02.1
Fig. B3.02.2
Fig. B3.03
AuV CB 240 EX.indb 50
29.06.16 09:45
