Performance HyperVibe, User Instructions

Page: 8 / 22

Step 2
Place the control panel (1) near the post (9).
Connect the control panel wire connector (D) to the post
top wire connector (C).
Align the control panel (1) to the post (9), and fasten it
using the screw/allen key wrench (S5), with flat washers
(5) and bolts (4).
See Fig. 2
Step 3
Place the right handle bar (2) near the post (9).
Align the right handle bar (2) to the post (9), and fasten
it using the screw/allen key wrench (S5), with flat
washers (8), spring washers (7), and bolts (6).
Place the left handle bar (3) near the post (9).
Align the left handle bar (2) to the post (9), and fasten it
using the screw/allen key wrench (S5), with flat washers
(8), spring washers (7), and bolts (6).
See Fig 3.
Step 4 (optional)
Attach optional stretch bands (included) at base. Adjust
bands to change band resistance.
Bands will make a rattling sound on machine if not pulled tight.
See Fig 4.
*Note –
8