Performance HyperVibe, User Instructions

Page: 11 / 22

OPERATING INSTRUCTIONS
Before switching on the PERFORMANCE, ensure your machine is on a stable, solid, and dry surface.
Please see assembly instructions to adjust the stability of the machine and see precautions to learn
more about ideal floor construction.
Plug the PERFORMANCE into any standard 240V wall outlet and switch the unit on at the base.
Standby mode
When powered up, the machine will be in standby mode. When in standby mode the LCD display will
be lit up, and display the word HYPERVIBE only. The machine will return to standby mode anytime the
machine is idle for more than 30 seconds.
Quick start mode
From the standby screen, select the ON/OFF key
Select the ON/OFF key again
The machine will now start at the lowest speed of 6Hz at a countdown of 10 minutes.
Use the + or – key to increase or decrease the speed.
Use the DISPLAY key to change the display from speed to time, and from time to speed.
Press the ON/OFF key at anytime to stop the machine.
Manual mode
From the standby screen, select the ON/OFF key then select the ENTER key to select manual
use.
Next you will be prompted to set the
UXQQLQJGXUDWLRQRIWKHPDFKLQH
, from 15
VHFRQGVXSWR
a maximum of minutes.
Using the + or – key increase or decrease the
UXQGXUDWLRQ
between seconds and
VHFRQG
s.
Select the ENTER key to confirm.
Select the minutes, use the + or – key to increase or decrease the minutes by increments of 1
minute.
Select the ENTER key to confirm and start the machine.
The machine will now start at the lowest speed of 6Hz.
11