Performance Motion Devices CME N Series, User Manual

Page: 46 / 70

46 ION/CME N-Series Digital Drive Developer Kit User Manual
3
3.2 Developer Kit Hardware Contents
3.2.1 Serial Host Interface DKs
The table below lists the hardware components and accessories provided with serial host interface N-Series ION
DKs, P/Ns DK481S0056/02, DK481S0056/06, DK481S0056/18, and DK4X1S:
* With the pre-assembled DKs the ION unit, interconnect DK PCB, base plate, thermal pad, and mounting screws are all pre-assembled
together and the ION unit is soldered into the PCB. With the non pre-assembled DKs the N-Series ION unit is not included and the
components are provided without being assembled together. For instructions on assembling a complete N-Series ION DK stack refer to
Section 3.5, “Component Developer Kit Assembly.”
** ION unit not included with non pre-assembled DKs
*** Allen key not included with pre-assembled DKs
DD411C0056/06 CAN/SPI Medium (350W) 12-56V DC Brush
DD411C0056/18 CAN/SPI High (1,000W) 12-56V DC Brush
DD411D0056/02 Ethernet Low (75W) 12-56V DC Brush
DD411D0056/06 Ethernet Medium (350W) 12-56V DC Brush
DD411D0056/18 Ethernet High (1,000W) 12-56V DC Brush
Multi Motor
DD481S0056/02 Serial Low (75W) 12-56V Multi Motor
DD481S0056/06 Serial Medium (350W) 12-56V Multi Motor
DD481S0056/18 Serial High (1,000W) 12-56V Multi Motor
DD481C0056/02 CAN/SPI Low (75W) 12-56V Multi Motor
DD481C0056/06 CAN/SPI Medium (350W) 12-56V Multi Motor
DD481C0056/18 CAN/SPI High (1,000W) 12-56V Multi Motor
DD481D0056/02 Ethernet Low (75W) 12-56V Multi Motor
DD481D0056/06 Ethernet Medium (350W) 12-56V Multi Motor
DD481D0056/18 Ethernet High (1,000W) 12-56V Multi Motor
Name PMD P/N Description
N-Series ION Stack*
N-Series ION unit** DD481S0056/02 (low power)
DD481S0056/06 (medium power)
DD481S0056/18 (high power) Either low, medium, or high power
multi-motor serial interface N-Series
ION unit
Serial DK PCB PCB-1047-41 Populated four-layer interconnect PCB
for serial host interface N-Series ION
DKs
Base plate NION-DKH-01 Black anodized aluminum N-Series
ION DK base plate
Mounting screws N/A Four M2.5 x 0.45 mm thread, 8 mm
long, button head screws
Thermal pad NION-DKH-02 10 mil (.25 mm) thick thermal pad cut
to dimensions 33.5 mm by 33.5 mm
Other Cables & Components
3-pin programming cable Cable-USB-3P USB to 3-pin programming cable for
communicating with N-Series ION
DB9 serial cable Cable-USB-DB9 Male DB9 to USB serial converter
cable
Allen key*** N/A 1.5 mm Allen key