TTR-07.1 Electromechanical Tripod Turnstile
Figure 12. Location of the interior components of the turnstile housing
(a, b, c – lubrication points)
1 – stop spring bracket; 2 – mechanism base; 3 –stop spring pulling pin; 4 –stop spring;
5 – resetting mechanism pusher lever; 6 – arm rotation sensor disk;
7 – CLB protection glass; 8 – CLB; 9 – electromagnet; 10 – CLB bracket;
11 – barrier arm drop mechanism; 12 – damper; 13 – barrier arm drop mechanism spring;
14 – stopper spring; 15 – stopper absorber; 16 – resetting mechanism stopper;
17 – winch; 18 – stopper unit motor; 19 – bracket; 20 – damper holder;
21 – optical arm rotation sensor.
11 TRANSPORTATION AND STORAGE
The turnstile in the original package should be transported in closed freight containers or in
other closed type cargo transport units. During storage and transportation the boxes can
be stacked no more than 4 layers high.
The storage of the turnstile is allowed indoors at ambient temperature from –40°C to
+45°C and at relative air humidity up to 98% at +25°
С
.
The environment should be free of
acid and alkali vapours and gases that cause corrosion.
After transportation or storage at temperatures below zero or at high air humidity, prior to
the installation the turnstile must be kept in the original package for no less than 24 hours
indoors at room temperature.
27
Summary of Contents for TTR-07.1
Page 32: ......
Page 34: ...www perco com...
