TTR-07.1 Electromechanical Tripod Turnstile
8 INSTALLATION INSTRUCTIONS
8.1 Installation details
Caution!
Follow the safety requirements during the installation (see clause 7.1)
Correct turnstile installation provides its functionality and lifetime. Please carefully study
and follow the installation instructions.
Caution!
The manufacturer shall not be liable for any damage caused as the result of
improper installation and declines any claims arising thereof in case
if the installation is not done in compliance with the instructions provided
in this
Manual
.
It is recommended:
to mount the turnstile on steady and level concrete (grade 400 or higher), stone or
similar foundations at least 150 mm thick;
to level the foundation so that the anchoring points of the turnstile lie in the same
plane;
to apply reinforcing elements (400×400×300mm) for installation on less steady
foundation (frame foundation, for example);
to mark the mounting holes according to Fig. 10;
to control the vertical position of the turnstile during installation;
to arrange additional emergency exit;
when creating the passage area through the turnstile take into account that the
resetting device operates as follows:
o
at the barrier arm turning at the angle of more than 60° the reset is effected in
the direction of movement and the turn of barrier arm to counter direction is
not possible (blocking of return passage) ;
o
at the barrier arm turning at the angle less than 60° the reset is effected in
the counter to the movement direction (reset to home position).
Note:
The angle gradient, at which the barrier arm reset commences, may vary in the
range of ± 5°.
To ensure accurate passage tracking, when the turnstile is operated from an ACS, it is
recommended to create the passage area in such a way that the barrier arms should turn
in the direction of movement at the angle no less than 70° (Fig. 9).
Figure 9. Site preparation. Recommendations
17
Summary of Contents for TTR-07.1
Page 32: ......
Page 34: ...www perco com...