background image

TTR-07.1 Electromechanical Tripod Turnstile

 

Table 2. Pulse control mode (the jumper is set on the J1 connector) 

 

The turnstile 

operating modes

 

 

Actions  

to do  

Indication on 

the RC panel 

Indication on 

the LED display  

Turnstile status  

Always locked 
(Locked for entry 
and exit) 

Press the 

STOP

 

button on the RC 
panel 

The red 
indicator  
above the 

STOP

 button is 

on 

The “Red cross” 
pictogram is on 

The turnstile is 
locked 

Single passage in 
the set direction 
(open for passage 
of one person in 
the chosen 
direction) 

Press the button 
on the RC panel 
corresponding to 
the chosen 
passage direction

The green 
indicator above 
the button of 
the chosen 
passage 
direction is on 

The “Green 
arrow” 
pictogram, 
showing the 
passage 
direction is on 

When the passage 
is completed, the 
turnstile is locked 

Bi-directional 
single passage 
(open in both 
directions for 
‘one-by-one’ 
passage) 

Press both the 
left and right side 
buttons on the 
RC panel 
simultaneously 

The two green 
indicators (left 
and right) are 
on 

The two “Green 
arrow” 
pictograms (left 
and right)  
are on 

The turnstile is 
locked in the 
direction of 
completed passage 

Free passage in 
the set direction 
(open for free 
passage in the 
chosen direction) 

Press the 

STOP

 

button and the 
button 
corresponding to 
the chosen 
passage direction 
simultaneously 

The green 
indicator above 
the button of 
the chosen 
passage 
direction is on 

The “Green 
arrow” 
pictogram, 
showing the 
passage 
direction is on 

Turnstile remains 
open in the set 
direction 

Free passage in 
the set direction 
and single 
passage in the 
opposite direction 
(open for free 
passage in the 
chosen direction 
and for passage 
of one person in 
the opposite 
direction) 

Carry out actions 
stated in 
Chapters 2 and 4 
of the present 
table in any order 

The two green 
indicators (left 
and right) are 
on 

The two “Green 
arrow” 
pictograms (left 
and right) are on 

After the passage in 
the free passage 
direction the turnstile 
remains open in 
both directions. After 
the passage in the 
single passage 
direction the turnstile 
remains open in the 
free passage 
direction but it is 
gets locked in the 
single passage 
direction 

Always free (open 
for entry and exit) 

Press all the 3 
buttons on the 
RC panel 
simultaneously 

The two green 
indicators (left 
and right) are 
on 

The two “Green 
arrow” 
pictograms (left 
and right) are on 

The turnstile 
remains open 

23 

Summary of Contents for TTR-07.1



































Reviews:

Related manuals for TTR-07.1