manualshive.com logo in svg

Peraqua 84050, Manual, Page: 39 / 39

Share
Download
Peraqua 84050 Manual Download Page 39

 
 

iQntrol DOS-MODBUS

 

 

Original manual in German Version 1.0.2 2022.10.06 

 

39/39 

OPTIONS 

Item number 

 

 

0024854 

OPTIONAL for IQntrol DOS MODBUS V3 - 2 Sa dosing pumps instead of SR10 
(Dosing performance 150 up to 2200 ml/h – hose kit 08./1.6/3.2 x 1.6) 

 

0014140 

Pump housing Sa grey/anthracite 

 

0013039 

Roller support for peristaltic pump Sa blue 

 

0013482 

Hose set Sa 0.8x1.6-Ph  blue marking 

 

0013412 

Hose set Sa 1.6x1.6-Ph  black marking 

 

0013413 

Hose set Sa 3.2x1.6-Ph  green marking 

 

0024871 

Fine filter 300 µ ¼“ 6x1 complete 

 

(½“ design upon request) 

 

0021531 

Temperature sensor 6 x 50 mm 2 m line length 

(special length) 

(with 12910 for external installation) 

 

0012910 

Temperature sensor sleeve PVC ½“ x 60 mm    

(for external installation) 

 

 

 

 

 
16

 

Personal notes 

 
You can use the following lines for personal notes, e.g., regarding conducted service tasks or extensions and device modifications. 
 
 
---------------------------------------------------------------------------------------------------------------------------------------------------------------------------- 
 
 
---------------------------------------------------------------------------------------------------------------------------------------------------------------------------- 
 
 
---------------------------------------------------------------------------------------------------------------------------------------------------------------------------- 
 
 
---------------------------------------------------------------------------------------------------------------------------------------------------------------------------- 
 
 
---------------------------------------------------------------------------------------------------------------------------------------------------------------------------- 
 
 
---------------------------------------------------------------------------------------------------------------------------------------------------------------------------- 
 
 
---------------------------------------------------------------------------------------------------------------------------------------------------------------------------- 
 
 
---------------------------------------------------------------------------------------------------------------------------------------------------------------------------- 
 
 
---------------------------------------------------------------------------------------------------------------------------------------------------------------------------- 
 
 
---------------------------------------------------------------------------------------------------------------------------------------------------------------------------- 
 
 
---------------------------------------------------------------------------------------------------------------------------------------------------------------------------- 
 
 
---------------------------------------------------------------------------------------------------------------------------------------------------------------------------- 
 
 
---------------------------------------------------------------------------------------------------------------------------------------------------------------------------- 
 
 
---------------------------------------------------------------------------------------------------------------------------------------------------------------------------- 
 
 
---------------------------------------------------------------------------------------------------------------------------------------------------------------------------- 
 
 
---------------------------------------------------------------------------------------------------------------------------------------------------------------------------- 

Summary of Contents for 84050








































Reviews:

No comments