iQntrol DOS-MODBUS
Original manual in German Version 1.0.2 2022.10.06
38/39
15
Spare part list
The spare parts listed in the following are available through your specialist dealer. Please always include the exact product designation and the
device serial number with your orders.
Tip
Please note that as a rule, the spare parts list only contains replacement parts for the standard devices.
Customer-specific or order-specific special articles are not taken into account.
Tip
When ordering replacement parts for IQntrol DOS MODBUS devices, please note that not all of the articles are suitable for all device
versions.
The item numbers on a blue background denote wear parts. Wear parts are excluded from the 2-year warranty!
Dosing technology
Item number
Article
0010039
Dosing cartridge SR10 3.0 mm white rollers
(standard)
0012500
Dosing motor SR10 3.0 mm
(standard)
0012472
Suction set NF d16 x 500 yellow - 2 m cable length
(standard)
0012473
Suction set NF d16 x 500 red - 2 m cable length
(standard)
0024717
Hose bracket SR10 with hose rupture contacts
0018860
Valve rubber set 9 x 1.5 - 14 for both dosing valves
0024718
Dosing valve 3/8“ - 4 x 1 - Si 9 x 1.5
Flow-through fitting
Item number
0012023
Ball valve PVC ¼“ – 6 x 1 mm (inlet and drain)
0024271
Measuring cell CPR – PKT
0011017
Test water tap PVC ¼“
0024716
Maintenance set for flow controller
0010480
Filter cup transparent
(standard ¼“ filter)
0010481
Filter cup gasket
(standard ¼“ filter)
0010482
Filter element 300 µ
(standard ¼“ filter)
0015077
Tube- PVC 4 x 1 mm
(by the metre)
0010435
Tube- PE 6 x 1 mm
(by the metre)
0010433
Tube- PTFE 6 x 1 mm
(by the metre)
0012031
Ball Valve d20 – 6 x 1 mm
Electrodes
Item number
0010933
pH electrode PG13.5 60 mm
(standard)
0011984
Redox electrode ½“ complete - platinum
(standard)
0011986
Redox electrode insert d14 - platinum
(standard)
0028051
Redox electrode ½“ complete - gold
(Electrolysis)
0026978
Redox electrode insert d14 - gold
(Electrolysis)
0011985
Gasket set for redox electrode
(standard)
0011964
Cleaning beads 5 ml
0015945
Electrolyte solution KCl 3 mol/l - 30ml for overwintering
0010383
Buffer solution ph4 50 ml
0010384
Buffer solution ph7 50 ml
0010385
Redox test so468 mV 50 ml
0011962
Electrode cleaner - diaphragm cleaner 50 ml
0011963
distilled water 500 ml
Control unit/ electronics Item number
Depending on the version
see label and serial number on the electronic
circuit board
Depending on version Power pack – NT-SCHW-8_V2.1
Depending on version I/O- Board – I/O-SCHW-8_V2.1
Depending on version Measuring amplifier – MV_CPRT
Depending on version Control panel– DSP_S7 SANTINO (capacitive)
0024759
Light rod with RGB LED (black line)
0012006
pH electrode cable with screw plug head
0012009
Redox electrode cable 4 mm MC plug 90 cm
0024681
Temperature sensor 6 x 25 mm in measuring cell
0010489
Measuring water flow switch d6 x 30 mm green NC