Instruction Manual peqSTAR X thermal cyclers
PEQLAB_v1212E
28
12.3.2.3
User name
Please enter the user name of the used email account. Please note that you have to enter
the SMTP settings here. In case you have defined different user names for incoming and
outgoing mail server in your account settings, enter here the user name for the outgoing
mail server.
12.3.2.4
Password
Please enter the email password of the used email account. Please note that you have to
enter the SMTP settings here. In case you have defined different passwords for incoming
and outgoing mail server in your account settings, enter here the password for the
outgoing mail server.
12.3.2.5
SMTP-Server:
Please enter the outgoing mail server which should be used for sending the email.
12.3.2.6
SMTP Port:
Please enter the SMTP port which should be used for sending the email. Standard setting
for the port is 25.
12.3.2.7
Send Testmail:
By pushing this button a test mail is sent, to check whether the settings are correct and
emails could be send by the cycler.
In case the test mail could not be sent successfully, please ask your network administrator
for the required settings.
12.4
User Management
In the user accounts management, user groups or single users can be configured and their
settings e.g. right of access (reading programs, edit programs etc.) will be administered.
The users are assigned to given or predefined user groups which are assigned to rights of
access.
Important: the thermal cycler supports the assignment of rights of access to certain user
groups. This means that rights for the operation of functions are given or refused to certain
user groups. In the user administration, user groups are configured and equipped with
rights. Single users of those groups are limited to the appropriate rights.
Rights are not assigned to single users but user groups. Users of a certain user group
inherit the rights of the related group.
The name of a user appears in the program header of a program generated by the user as
well as in the GLP report of a program run by the user.
Summary of Contents for peqSTAR 2X
Page 2: ......
