Instruction Manual peqSTAR X thermal cyclers
PEQLAB_v1212E
16
How to emulate a protocol ABC from cycler XY on a peqSTAR in the right way?
Program:
Enter the protocol ABC in the program editor
of the peqSTAR the same way you did it on
the cycler XY.
Emulation:
Go to ‚Program Options’ => ‚Emulation’ and
choose the cycler XY that you have used
previously.
Tube Control:
Did you had to enter a volume setting in your
cycler XY (Tube Control mode)?
If yes, please enter the same volume in the
peqSTAR in the ‚Program Options’ under
‚Tube Control’.
Ramp Rate:
Have you worked on cycler XY with a
reduced ramp rate?
Throughout the whole protocol?
Then you could adjust the ramp rate in the
‚Program Options’ under ‚Global Program
Ramp’ for the whole protocol.
Only for single steps in the protocol?
Then you could adjust the ramp rate for each
single temperature or gradient step.
Summary of Contents for peqSTAR 2X
Page 2: ......
