Instruction Manual peqSTAR X thermal cyclers
PEQLAB_v1212E
10
8
INCUBATION MODE
8.1
Run incubation
Use this button to set the device into the incubation mode. The temperature for the thermal plate
and lid can be set manually.
8.2
Setting the block and lid temperature
Set temperatures of block and lid by entering the values of choice in the corresponding editor
fields. By entering values < 40 °C the lid heating will be turned off.
8.2.1
Stop
Use this button to quit the incubation mode. Heating of the thermal plate and lid are then
deactivated.
8.2.2
Lid lock / unlock
Use this button to lock or unlock the lid.
For systems with HPL lids(High Pressure Lid) there is the option to define the lid pressure in an
opening dialogue.
8.2.3
Timer
The clock shows the time passed by in the incubation mode.
8.2.4
Block
Actual temperature of the thermal plate.
8.2.5
Lid
Actual temperature of the lid heat.
Summary of Contents for peqSTAR 2X
Page 2: ......
