Instruction Manual peqSTAR X thermal cyclers
PEQLAB_v1212E
14
9.2.4
New program
A new program can be generated, after pushing this button the program’s name has to be defined.
Optionally author, user, any comment and the program options can be entered.
9.2.4.1
New Cyclerprogram
Enter the name of the PCR program,
optionally also add name of the author and
a comment.
‘Path’ shows you the directory where the
program is stored. Over the button
you could change the path.
9.2.4.2
Program Options
Using the button
the
adjoining window appears:
9.2.4.3
Power Fail Denaturation
If 'Power Fail Denaturation' is activated by
pushing the 'checkbox'
the
adjoining dialogue appears:
If a power failure had happened while a program was
running the thermal cycler restarts the program at the
point it was stopped as soon as the power returns
(Autorestart after power failure).
Additionally, if the option 'Power Fail Denaturation' is
activated the thermal block will heat to the stated
temperature for the set time before continuing with the
program.
9.2.4.4
Global Program Ramp
Using the Checkbox
a global
ramp rate in °C/s can be programmed. This global ramp
rate will be used in all temperature and gradient steps of
the PCR program, but could be changed in a single
temperature or gradient step manually by entering the
desired value at the step.
Summary of Contents for peqSTAR 2X
Page 2: ......
