![background image](http://html1.mh-extra.com/html/pepperl-fuchs/visunet-gmp-pc219/visunet-gmp-pc219_hardware-manual_1527816041.webp)
VisuNet GMP RM/PC 200 series
Installation and Commissioning
2018-07
41
2. Hook the device at the screes on the wall.
3.7
Commissioning VisuNet GMP RM/PC
Use a low restistance connection between device and control cabinet.
Use cables with a minimum cross core-section of 2,5 mm
2
for power supply.
Turning on the VisuNet GMP
1. Connect the 4-pin plug with the 4-pin power supply socket at the back of the housing.
2. Fix and tighten the screws of the plug.
3. Switch on the power supply at source.
After establishing the power supply the VisuNet GMP starts automatically. The green
LED on the right hand side of the housing indicates a correct power supply.
Turning off the VisuNet GMP
1. Disconnect the device from the power supply.
2. After that unscrew the power plug at the VisuNet GMP.
Note!
Use the VisuNet GMP only with safety-low voltage (protective extra-low-voltage). The power
supply needs to be in line with applicable standards.