2018-07
34
VisuNet GMP RM/PC 200 series
Installation and Commissioning
3.5
Mounting to wall arm
Fastening the wall arm
1. To secure the wall arm from wall unevenness, use the enclosed gasket.
2. Mount the wall arm by using the 4 screws (M8).
Figure 3.8
Wall arm from side
1. Wall arm
2. Wall
3. Gasket
Running the keyboard cable through the wall arm
If you use a wall arm with keyboard pipe (
Wall-Arm-1-55-1V-KT-G-F-304
,
Wall-Arm-1-55-1V-
KT-G-T-304
), ia wire pull is already installed for running the keyboard cable through the wall
arm. Run the keyboard cable first. Run all other connection cables after that.
1. Tighten the keyboard cable (2) to the wire pull (1).
2. Carefully pull the keyboard cable up through the wall arm.
3. Remove the wire pull from the keyboard cable.
4. Attach the keyboard with 2 grub screws on the wall arm.
Caution!
Danger of instability
There are problems by keyboard entry. The device is not properly mounted to the wall.
Ensucre that the soil is stable. The soil must be able to absorb high mechanical energy. For
fastening the wall arm, use 4 screws (M8) which suit the soil conditions.
1
3
2
