2
0
1
8
-0
6
26
Installation
Figure 3.2
Connecting flat cables on the narrow side
Connecting Flat Cables on the Wide Side
The profile edge is not visible from above. For orientation purposes in the figure below, the
edge is shown as a hidden edge drawn with a dotted line.
1. Open the cable guide. To do this, push the locking bracket (1) slightly to one side.
2. Insert the black flat cable with the profile edge (2) to the ZPA motor control module into the
upper duct (see module tag "PWR").
The profile edge (2) of the flat cable is above the reverse polarity protection.
3. Close the cable guide. It must engage securely in the locking bracket (1).
The metal pins contact the cores of the flat cable.
PWR
1
2
3
