Introduction
2
0
2
1
-0
9
5
1
Introduction
1.1
Content of this Document
This document contains information required to use the product in the relevant phases of the
product life cycle. This may include information on the following:
•
Product identification
•
Delivery, transport, and storage
•
Mounting and installation
•
Commissioning and operation
•
Maintenance and repair
•
Troubleshooting
•
Dismounting
•
Disposal
The documentation comprises the following parts:
•
This document
•
Datasheet
In addition, the documentation may comprise the following parts, if applicable:
•
EU-type examination certificate
•
EU declaration of conformity
•
Attestation of conformity
•
Certificates
•
Control drawings
•
Instruction manual
•
Other documents
1.2
Target Group, Personnel
Responsibility for planning, assembly, commissioning, operation, maintenance, and dismount-
ing lies with the plant operator.
Only appropriately trained and qualified personnel may carry out mounting, installation, com-
missioning, operation, maintenance, and dismounting of the product. The personnel must have
read and understood the instruction manual and the further documentation.
Prior to using the product make yourself familiar with it. Read the document carefully.
1.3
Symbols Used
This document contains symbols for the identification of warning messages and of informative
messages.
Warning Messages
You will find warning messages, whenever dangers may arise from your actions. It is mandatory
that you observe these warning messages for your personal safety and in order to avoid prop-
erty damage.
Depending on the risk level, the warning messages are displayed in descending order as fol-
lows:
Note
For full information on the product, refer to the further documentation on the Internet at
www.pepperl-fuchs.com.
