2
0
2
1
-0
9
8
Safety
3
Safety
3.1
Safety Notices
Read the following information carefully and follow this information when working with the
device. Failure to observe the safety notices and warning messages in this documentation can
lead to malfunctions and hazardous operating scenarios during operation.
This can result in serious personal injury or death.
Target Group, Personnel
The personnel must be appropriately trained and qualified in order to carry out mounting,
installation, commissioning, operation, maintenance, and dismounting of the device. The
trained and qualified personnel must have read and understood the instruction manual.
Prior to using the product make yourself familiar with it. Read the instruction manual carefully.
Reference to Further Documentation
Observe laws, standards, and directives applicable to the intended use and the operating loca-
tion.
Intended Use
The device is only approved for appropriate and intended use. Ignoring these instructions will
void any warranty and absolve the manufacturer from any liability.
Operation, Maintenance, Repair
Do not remove the nameplate.
Do not remove the warning markings.
Do not repair, modify, or manipulate the device.
If there is a defect, always send back the device to Fuchs.
If there is a defect, always replace the device with an original device.
Only use accessories specified by the manufacturer.
When using the device, observe the safety guidelines applicable to the applications.
Supply the device with a power supply that meets the requirements for safety extra-low voltage
(SELV) or protective extra-low voltage (PELV).
Do not point the device directly at the sun.
Delivery, Transport, Disposal
Keep the original packaging. Always store and transport the device in the original packaging.
The device, built-in components, packaging, and any batteries contained within must be dis-
posed in compliance with the applicable laws and guidelines of the respective country.
