2
019-
03
22
Mounting and Installation
3. Use a 2.5 mm hexagon socket wrench to loosen the two hexagon socket cap head screws
in the lighting unit. The screws do not need to be completely removed.
Figure 3.11
Positioning on the rail (CB3)
4. Move the lighting unit along the rail to the
CB3
position.
5. Tighten the two hexagon socket cap head screws to a torque of 1.5 Nm.
6. Screw the enclosure cover back down.
Setting the Lighting Angle to CB1 Code Sheets
The procedure for setting the lighting unit for the CB1 code sheet is almost identical and differs
only in the positioning on the rail (CB1).
Figure 3.12
Positioning on the rail (CB1)
