Commands
201
2-
11
79
There is a read/write tag in the detection range.
Response:
The response indicates that the R/W head on channel 1 has received the
command (status = '0').
Further possible responses:
4 0 04 1 000 # CR = wrong tag type
6 0 04 1 000 # CR = no R/W head is connected
If you would like to apply the
Change tag
command to both channels, use
<Identchannel>
“
x
”
.
Command:
You will receive the 2 responses for both channels:
0 0 04 1 000 # <CR>
0
Status
0
Reserved
04
Command code
1
Channel 1
000
Response length in bytes
#
End character
<CR>
End character
Note!
The tag type is stored in the non-volatile memory for each channel of the control
unit.
CT
x 03 # <CR>
CT
Change tag
command
x
All channels
03
Tag type IPC03
#
End character
<CR>
End character
