201
2-
11
38
Commands
If trigger mode is activated with <Triggermode>=1 (=2), dampening the trigger
sensor generates the status 0 (5) and after changing to undamped state,
generates the status 5 (0) as a response to <Sensorchannel>. Activating trigger
mode generates a response that includes the current status of the sensor on
<Sensorchannel>.
If a read/write command is sent to the triggered channel <Identchannel> when
trigger mode is active, this command is always activated if the <Sensorchannel>
transmits status 0. <Identchannel> transmits status 0 to confirm receipt of this
command.
The command activated by <Sensorchannel> initiates execution of the command
as if it had just been restarted by the host.
The command is deactivated again if the status of <Sensorchannel> changes to 5
or the trigger mode is deactivated.
If <Sensorchannel> requests a version message, the response contains the
status 0 and no other information.
<Identchannel>=0 allows you to assign the trigger signal to channel '0' so that the
trigger signal is transmitted to the controller and not to a read head.
This function can be used to monitor functions via the PLC if trigger signals and
reading of data cannot occur simultaneously for application-related reasons.
Correlation must take place in the PLC.
