2
019-
02
6
Product description
2
Product description
2.1
Use and application
The WCS-ECG110 interface module serves as an interface between the WCS reader and the
EtherCAT controller. The device has 2 EtherCAT ports. The data is transferred between the
WCS reader(s) and the WCS-ECG310 via the RS-485 interface, and from the WCS-ECG310
to the control panel via the EtherCAT protocol.
You can connect up to 4 WCS readers of type LS221 or LS121. If you connect several readers,
they must have different addresses. The number of connected readers is configured in the
hardware project settings.
2.2
Dimensions
The interface module housing has the following dimensions.
Figure 2.1
Dimensions
115
100
23
