CP331
Installation
ID 19947, Rev. 0200
Page 3 - 4
©
2000 PEP Modular Computers GmbH
3.2 Software Installation
3.2.1
Driver Installation
Drivers for Windows NT and other supported operating systems are provided with the
CP331 driver kit. Exact guidelines can be found in the readme file which should be fol-
lowed before starting the installation procedure. Please follow also the interactive
instructions of the installation program and enter specific data when prompted.
3.2.2
BIOS Configuration
Up to sixteen flatpanel types can be made jumper-selectable by entering the appropriate
paramteres with the help of one of the BIOS configuration utilities included in the supply.
A specific BIOS for almost any panel on the market can be created. For configuration,
please refer to the technical manual for the C&T 69000 or C&T 69030 graphic controller
chip or consult
PEP Modular Computers.
Configuration Utilities
The BIOS configuration utilities included in the supply are required only in case a cus-
tomer is interested in creating a jumper-selectable panel setting. The utilities can be
installed from the supplied floppy disks which include also files containing all necessary
instructions for the installation and use of the configuration utlities.
The utility files are contained by the floppy disks as spanned disk files. Therefore, you
should use a recent version of the WinZip or PKUnZip utilities to unpack the files.
Reference is made by the utilities to the C&T 69555 graphic controller chip. However,
they can be used indifferently for the C&T 69000 and the C&T 69030 installed on the
CP331 boards.
Note...
Please ensure that the connected monitor or display supports the
selected resolution. Otherwise damage may result due to incor-
rect operating frequency parameters.
Warning!
Wrong configuration can cause damage to your flatpanel equip-
ment. Therefore, we recommend that the configuration is carried
out by
PEP Modular Computers or by one of their authorized
partners.
